decorative mortars
SD 60C COLOR
Colored marble finish, reinforced with polymer resins. It has increased elasticity, adhesion and water repellency compared to plain finish plasters. It is used for the final finishing of the surfaces as a final layer of marble plaster, after the base layer plaster or the traditional plaster.
More information here .
SD 70 DECOR
Ready-made fiber cement mortar, for the formation of smooth surfaces with the technique of pressed cement mortar on walls and floors indoors and outdoors. It is used for the formation of a pressed surface on walls and floors, as well as in special constructions such as swimming pools, built-in bathtubs and sinks, tables, stairs, etc., giving the constructions the special aesthetics of the Cycladic architecture.
More information here .
SD 80 DECOR • FLEX
Flexible, resinous, fiber-reinforced pressed cement mortar for the formation of special aesthetics, wall and floor surfaces indoors and outdoors. It is applied on floors and walls indoors and outdoors, on concrete substrates, reinforced plaster, plasterboard, cement board, on old floors (mosaics, natural stones, tiles) and on special constructions such as built-in bathtubs, washbasins, sinks, swimming pools, etc. , giving the constructions the special aesthetics of the Cycladic architecture.
More information here .
SD 90 DECOR • MICRO FLEX
Elastic, very fine-grained, pressed cement mortar for the formation of smooth, modern and durable surfaces on walls and floors indoors and outdoors. It is applied on floors and walls indoors and outdoors, on any type of substrate (concrete, plaster, old floors, underfloor heating, plasterboard, cement board, MDF).
More information here .
NATURAL COLORS
High quality natural pigments (inorganic composition) for coloring cement mortars. Ideal for painting SD 70 DÉCOR, SD 80 DÉCOR • FLEX and SD 90 DÉCOR • MICRO FLEX cement mortars, as well as SD 60 COLOR and FC 1200 cement plasters.
More information here .
SD 300
Resin cement mortar, based on special hydraulic binders reinforced with special polymer additives and fibers. It is used for smoothing surfaces before applying decorative coatings on floors and walls, as well as for finishing concrete and plaster surfaces before their final painting.
More information here .
FINO • CONTACT
Adhesion-enhancing primer based on synthetic resins, quartz aggregates of selected quality and granulometric grading and special additives. It is used on smooth, absorbent or not at all absorbent surfaces such as cement mortars, exposed concrete, ceramic tiles, screeds, polystyrene, etc.
More information here .
DECODUR COAT • PU 2K GLOSS
2-component polyurethane, aliphatic varnish with glossy appearance. It has high resistance to sunlight (does not turn yellow) thanks to the UV filters it contains, as well as high mechanical strength. It is used for the protection of pressed surfaces of cement mortar, concrete, wood, metal, epoxy and industrial floors, as well as in swimming pools.
More information here .
DECODUR COAT • PU 2K MAT
Polyurethane, 2-component aliphatic varnish with matte finish. It has high resistance to sunlight (does not turn yellow) thanks to the UV filters it contains, as well as high mechanical strength. It is used for the protection of pressed cement mortar surfaces, as well as epoxy and industrial floors.
More information here .
DECODUR COAT • PU 2K • W MAT
Polyurethane, 2-component aliphatic varnish, without solvents, with matte finish. It has high resistance to sunlight (does not turn yellow) thanks to the UV filters it contains, as well as high mechanical strength. It is used for the protection of pressed cement mortar surfaces, as well as on surfaces of stone, wood and cement industrial floors of mild stress.
More information here .
PU • SOLVENT
Solvent for polyurethane spreadable roof sealant HYDROFLEX • PU and polyurethane varnishes DECODUR COAT • PU 2K GLOSS and DECODUR COAT • PU 2K MAT. It is applied for the dilution of polyurethane materials in order to be applied with a roller or brush, as well as during the application with spray (airless).
More information here .
ACRYLIC PRIMER
Aqueous dispersion of acrylic resins which due to the very small size of their particles achieve extremely high penetration into the porous surfaces, stabilizing them and thus creating the right conditions for proper adhesion to them. It is used as a ready-to-use primer before the application of spreadable elastomeric sealants (cementitious, acrylic, hybrid), acrylic plasters and water-soluble paints.
More information here .
SIL • PROOF 5080
Aqueous dispersion for the impregnation of building materials such as natural or artificial stone, plasters, etc. Provides hydrophobicity and oil phobia of long duration, without leaving stains or affecting the properties (perspiration) and colors of materials, while protecting against moisture penetration flowering, as well as damage caused by frost, water-soluble pollutants and other microorganisms.
More information here .