waterproofing & sealing materials, putties
HYDROSEAL HS 5000
Cementable mortar based on cement. Used for waterproofing in cases of simple humidity, water under pressure (up to 7atm) and even in cases of negative pressure. Ideal for sealing basements, tanks, swimming pools, biological treatment tanks, concrete, masonry, plaster, etc.
More information here .
HYDROSEAL ELASTIC
Elastic, spreadable 2-component waterproofing mortar. Component A consists of a cementitious mortar and component B is a synthetic emulsion of resins. It is applied for the waterproofing of surfaces of concrete, plaster, construction materials such as bricks, cement blocks, aerated concrete, etc., as well as for cement boards, metal surfaces, etc.
More information here .
HYDROFLEX • ACRYL
Spreadable elastomeric roof sealant based on acrylic polymers. After its application, it forms an elastic membrane without joints. It is used for waterproofing rooms, balconies, as well as for difficult points such as corners, edges, joints between different materials or sealing cracks in roofs.
More information here .
HYDROFLEX • PU
One-component polyurethane roofing sealant. After its application, it forms a waterproof membrane without joints with high elasticity and strength. Ideal for sealing rooms, balconies, as well as for difficult areas such as corners, edges, joints between different materials or sealing cracks in roofs.
More information here .
EPOXY • PRIMER
Transparent two-component epoxy primer, without solvents. It has high penetration, high hardness and resistance to water, acids and alkalis. Used as a primer for the application of polyurethane sealant HYDROFLEX • PU on non-absorbent surfaces.
More information here .
DP • 5350
Ready to use aqueous silicate solution for the treatment of rising humidity. It does not corrode the reinforcement of concrete. It is mainly used to deal with rising moisture in masonry or concrete structures, creating a hydrophobic horizontal barrier that prevents capillary absorption.
More information here .
SC 01
Ultra-fine resin cement mortar for plastering the surfaces to be painted. It is used for the smoothing (troweling) and preparation of the surfaces to be painted and in any case that requires a perfectly smooth surface.
More information here .
SC 02
Resin cement mortar for plastering and covering imperfections on surfaces to be painted. It is used for the smoothing (troweling) and preparation of surfaces to be painted, as well as for the repair of small cracks.
More information here .
SPATULA • COARSE
Reinforced cement mortar for finishing surfaces after the 2nd or 3rd coat of plaster. Used to smooth and prepare the surfaces to be painted. It is applied on plasters, gypsum boards, cement boards, concrete.
More information here .
SPATULA • FINE
Ultra-thin, reinforced cement mortar for finishing (plastering) surfaces after the 3rd coat of plaster or coarse-grained spatula. It is used for the smoothing (troweling) and preparation of the surfaces to be painted and in any case that requires a perfectly smooth surface.
More information here .
FIX PRIMER • PU
One-component polyurethane primer, to improve the adhesion of elastomeric sealants or adhesives (PU • FIX) on porous surfaces. In substrates of concrete, aerated concrete, masonry, natural stones, wood, etc., for the improvement of elastomeric sealants and adhesives (PU • FIX).
More information here .
PU • FIX
Elastomeric polyurethane sealant one component, high thixotropy. Available in white and gray. Used for sealing and bonding vertical and horizontal joints between similar and heterogeneous materials in building and technical projects, prefabricated, marine and industrial applications, indoors and outdoors.
More information here .